Microphone Modelling System

• Large-diaphragm condenser microphone for reproducing the sound characteristics of 38 classic ribbon, condenser and dynamic microphones

• 2.54 cm Double-diaphragm design (gold-plated)

• Dual mode for different microphone combinations

• Microphone type, polar pattern and other characteristics can be changed even after the recording has been made

• Sound of different microphones can be auditioned

• Reduce crosstalk, unwanted room colouration and other common recording problems using IsoSphere and Presets

• Attenuation options: -10db and -20dB

• Requires 48 V phantom power

• Polar pattern: Variable Dual Output

• Frequency range: 20 - 20,000 Hz

• Output impedance: 200 Ohm

• Max. sound pressure level: 145 dB SPL, 1% THD (with pad)

• Dynamic range: 135 dB

• Connection: XLR-m (5-pin)

• Dimensions (L x Ø): 195 x 50 mm

• Weight: 545 g

• Supported plug-in formats UAD, AAX Native, VST2, VST3, Audio Units (Mac only)

• Supported operating systems Native (AAX, VST and AU): Mac OSX 10.15 and higher, Windows 10 and 11 (64-bit)

• Supported operating systems Apollo interfaces and UAD-2 hardware (AAX, VST, AU and RTAS): Mac OSX 10.15 and higher, Windows 10 and 11.

• System requirements: Internet connection, compatible plug-in host application (DAW software) with support for AAX, VST2, VST3, AU or UAD, UA Connect for managing UADx plug-ins, two mic preamps with phantom power.

• Incl. microphone holder, 3 m split cable (5-pin XLR to 3-pin XLR) and a case

Microphone Modelling System

• Large-diaphragm condenser microphone for emulating the sound characteristics of 38 classic ribbon, condenser and dynamic microphones in stereo

• 2.54 cm double-diaphragm design (gold-plated)

• Stereo recording possible with a single microphone

• Microphone type, polar pattern and other characteristics can be changed even after the recording has been made

• Listening to the sound of different microphones possible

• Reduce crosstalk, unwanted room colouration and other common recording problems using IsoSphere and presets

• Attenuation options: -10db and -20dB

• Requires 48 V phantom power

• Polar pattern: Variable Dual Output

• Frequency range: 20 - 20,000 Hz

• Output impedance: 200 Ohm

• Max. sound pressure level: 140dB SPL

• 1% THD (with pad)

• Dynamic range: 133 dB

• Connection: XLR-m (5-pin)

• Dimensions (L x Ø): 225 x 63 mm

• Weight: 770 g

• Supported plug-in formats UAD, AAX Native, VST2, VST3, Audio Units (Mac only)

• Supported operating systems Native (AAX, VST and AU): Mac OSX 10.15 and higher, Windows 10 and 11 (64-bit)

• Supported operating systems Apollo interfaces and UAD-2 hardware (AAX, VST, AU and RTAS): Mac OSX 10.15 and higher, Windows 10 and 11.

• System requirements: Internet connection, compatible plug-in host application (DAW software) with support for AAX, VST2, VST3, AU or UAD, UA Connect for managing UADx plug-ins, two mic preamps with phantom power.

• Incl. elastic mount, 7.5 m split cable (5-pin XLR to 3-pin XLR), stand adapter and a bag

Dynamic Microphone

• Hemisphere modelling allows the sound characteristics of Sennheiser and Beyerdynamic microphones to be reproduced and the sound of the recordings to be shaped using filter, proximity and axis controls (even after recording)

• For kick drums, bass amps and other low-end sources and instruments

• Polar pattern: Supercardioid

• Frequency range: 20 - 15,000 Hz

• Sensitivity: -64 dB (0 dB = 1V/Pa @ 1 kHz)

• Output impedance: 50 ohms

• Robust all-metal construction

• Dimensions: 103.2 x 142.6 mm

• Weight: 727 g

• Includes integrated stand mount with angle adjustment, 5/8" to 3/8" thread adapter and storage bag

Dynamic Microphone

• With Hemisphere modelling for toms, guitar and bass amps, brass, percussion and much more

• Polar pattern: Hypercardioid

• Frequency range: 30 - 17,000 Hz

• Sensitivity: 54dB

• Output impedance: 600 ohms

• Hemisphere modelling allows the sound characteristics of Sennheiser and Beyerdynamic microphones to be reproduced and the sound of the recordings to be shaped using filter, proximity and axis controls (even after recording)

• Robust all-metal construction

• Dimensions: 113.5 x 50 x 97.5 mm

• Weight: 475 g

• Includes integrated stand mount with angle adjustment, 5/8" to 3/8" thread adapter and storage bag

Multi-Pattern Large-Diaphragm Tube Condenser Microphone

• Switchable polar pattern: omnidirectional, cardioid and figure-of-eight

• Frequency range: 10 - 18,000 Hz, +/-2 dB

• German-made CK12 capsule and Cinemag transformer

• Max SPL: 118 dB SPL, 1% THD

• NOS ECC85 tube

• Dimensions (L x diameter): 216 x 52 mm

• Handmade in the UA Custom Shop in Santa Cruz, California

• Incl. UA Bock 251 PSU true-linear power supply, microphone shock mount and premium vintage-style case

Large Diaphragm Condenser Microphone with Hemisphere Microphone Modelling System

• Reproduction of the sound behaviour of different microphones

• Hemisphere plug-in controlled equalisation with filter, proximity and axis controls (even after recording)

• Polar pattern: Cardioid

• Frequency range: 20 - 20,000 Hz

• Sensitivity: -39 dB (0 dB = 1V/Pa @ 1 kHz)

• Output impedance: 200 Ohm

• Requires +48V phantom power

• Dimensions (L x Ø): 162 x 52 mm

• Weight: 363 g

• Includes microphone holder, thread adapter 5/8" to 3/8" and UA transport bag

Dynamic Microphone

• Hemisphere modelling allows the sound characteristics of Sennheiser and Beyerdynamic microphones to be reproduced and the sound of the recordings to be shaped using filter, proximity and axis controls (even after recording)

• For percussion and instruments

• Polar pattern: Cardioid

• Frequency range: 40 - 15,000 Hz

• Sensitivity: 58dB

• Output impedance: 250 ohms

• Robust all-metal construction

• Dimensions (H x D): 91 x 42 mm

• Weight: 214 g

• Includes thread adapter 5/8" to 3/8", stand mount and storage bag

Tube Large-Diaphragm Condenser Microphone

• Continuously adjustable polar patterns: omnidirectional, figure-eight and cardioid

• Handmade in the UA Custom Shop in Santa Cruz, California

• NOS EF732 tube

• Frequency range (+/- 2 dB): 10 Hz - 18 kHz

• FDual-balanced K6 capsule and Lundahl transformer

• Fat switch for low-end boost between 10 Hz and 400 Hz

• Switchable pad: -10 dB

• Switchable high frequency contour: Cut (-1.5 dB @ 5 kHz), Cut (-3 dB @ 10 kHz), Flat, Boost (+2 dB @ 10 kHz)

• Maximum level (1% THD): 118 dB SPL

• Includes UA Bock 167 PSU true-linear power supply, microphone shock mount and storage case

FET Condenser Microphone

• Polar pattern: cardioid

• Frequency range: 20 - 16,000 Hz, +/-2 dB

• Max SPL: 125 dB SPL, 1% THD

• Class A FET circuit

• Large Cinemag output transformer for powerful bass and more headroom at low frequencies

• Fat mode for boosting low frequencies between 10 and 400 Hz

• Low-cut at 120 Hz

• -10 dB pad

• Handmade in the UA Custom Shop in Santa Cruz, California

• Incl. wooden storage case

Note: requires 48 V phantom power.

TGIM20 Dynamic Microphone constructed from zinc alloy die-cast body with a silver metal grill and giving a clear and smooth sound.

Frequency Response:70Hz-15kHz • Sensitivity:  56dB +-3dB • Output Impedance:  600ohms +-30% • silver metal grill • zinc alloy die-cast body • clear and smooth sound • Includes 20ft XLR Cable, pouch and clip.

TGIM30 Professional Dynamic Microphone constructed from zinc alloy die-cast body with a black metal grill and giving a rich and smooth sound.

Frequency Response:   50Hz - 16kHz • Sensitivity:  52dB +-3dB • Output Impedance:  400ohms +-30% • black metal grill • zinc alloy die-cast body • rich and smooth sound • Includes 20ft XLR Cable, pouch and clip.

TGI Wireless Transmitter System for Microphone

Say goodbye to wires and enjoy more freedom while performing or speaking. This wireless system makes your setup hassle-free—just insert the transmitter into your microphone and the receiver into your speaker or amplifier. It's that simple!

With an effective range of up to 40 meters, this system ensures reliable, clear signal transmission. Whether you're on stage or moving around, you can count on uninterrupted sound.

Its mini size makes it easy to carry and set up wherever you go. Featuring a Canon interface, it’s secure and less likely to fall off, making it adaptable for various setups.

Enjoy up to 5.5 hours of continuous use on a full charge after just 2 hours of charging. The real-time power display keeps you informed of battery levels, so you never have to worry about running out of power unexpectedly.

The large battery capacity ensures long-lasting performance, perfect for extended use during events or performances.

Standard Style clip. Made of a high quality plastic which can accommodate 5/8" fittings. Featuring a 28mm diameter suitable for most microphones.

Clamp Style Clip. Made of a high quality, flexible plastic with a 5/8” fitting. Also featuring a 28mm diameter suitable for most dynamic microphones.

Microphone Boom Stand - Extra long extendable - with strong tripod base.

Height 1050 to 1750mm • Boom length 550 to 780mm • Tubular steel construction • Tripod base • Clutch height adjustment • Easy to transport • Bottom tube diameter 20mm • 2.3 kg

Microphone Stand - Straight - with heavy cast metal round base.

Height 830 to 1540mm • Tubular steel construction • Base diameter 230mm • Clutch height adjustment • Small stage footprint • Bottom tube diameter 20mm • 3.6 kg

Microphone Stand - Straight - with strong tripod

Height 900 to 1750mm • Tubular steel construction • Tripod base • Clutch height adjustment • Easy to transport • Bottom tube diameter 20mm • 2 kg

Microphone Boom Stand with strong tripod base.

Height 1050 to 1750mm • Boom length 750mm • Tubular steel construction • Tripod base • Clutch height adjustment • Easy to transport • Bottom tube diameter 20mm • 2.2 kg

The TGI USB Microphone by TGI brings studio-grade clarity to your desktop with effortless USB connectivity. Classified under PRO AUDIO, Micrófonos and Micrófonos de Estudio, it delivers clear, detailed capture ideal for vocalists, musicians, podcasters and streamers who need reliable, portable recording. Plug-and-play operation gets you recording in seconds on laptops and desktops without extra hardware, while a robust build stands up to daily use in rehearsals or home studios. If you want a straightforward, pro-sounding solution for tracking, streaming and voice work, the TGI USB Microphone gives professional results with minimal fuss.