Effect Pedal for Electric Guitar

• Compressor Pedal

• Authentic emulation of UA 1176 compression

• Single, dual and sustain compression modes

• True / buffered bypass

• Vintage-style controls: Input, output, attack, release and ratio ("All Buttons In" mode)

• Parallel compression mode

• Input and output: 6.3 mm jack

• USB type-C for updates via computer

• Power consumption: min. 250 mA

• Power supply via 9 V DC power supply unit, Centre negative (not included).

• Weight: 299 g

• Dimensions (W x H x D): 6.55 x 5.81 x 12.07 cm

Your sound, perfected.

• Get the classic compression colors of a Teletronix LA-2A, UA 1176, and Dyna Comp*, all in one pedal

• Explore the grit and character of UA's legendary 610 tube mic preamp

• Stack compressors in any combination for even more tones and textures

• Get realtime MIDI control of effects parameters**, improved Bluetooth and hardwired connections, and more using updated UAFX Control app

• Tweak preamp EQ settings, serial/parallel operation, add a sidechain bass filter, and more

Details

• The most authentic emulations of classic UA 1176, Teletronix LA-2A, and classic Dyna Comp compressors, in a single pedal

• Full emulation of UA's legendary 610 tube preamp and EQ

• Stack and layer any combination of compressors

• Supports MIDI-over-USB**, improved Bluetooth and hardwired connections, and more via the updated UAFX Control app

• Tweak preamp EQ settings, configure footswitches, add a sidechain bass filter, and more with the UAFX Control app

• Silent switching, buffered bypass, stereo operation

Effect Pedal for Electric Guitar

• Stereo guitar pedal with Dynamic Speaker Modeling with 22 speaker cabinets, six vintage microphones and full-featured effects such as 1176 compression, plate reverb, chorus, flange, stereo delay (dual, crossover, ping-pong) and 4-band EQ with high and low cut filters via the UAFX Control App

• Authentic speaker modelling, including speaker breakup, drive and cone cry

• UAFX Control app for fine-tuning microphones, effects and footswitch configurations

• Silent switching

• Buffered Bypass

• Analogue dry through

• Bluetooth

• Power supply via 9 V DC power supply unit (not included, suitable power supply unit: art. 543322)

• 2 Line/instrument inputs: 6.3 mm jack mono (L/R stereo)

• 2 Line outputs: 6.3 mm jack mono (L/R stereo)

• USB Type-C for updates via computer

• Dimensions: 9.2 x 6.5 x 14.1 cm

• Weight: 0.588 kg

Effect Pedal for Electric Guitar

• Stereo amplifier and speaker emulation

• With 6 well-known microphone/speaker combinations

• Integrated boosts, live and preset modes

• Customisations via UAFX Mobile App

• Authentic sound of the 120 W tube amp of the 90s for aggressive and "scooped" guitar sounds of metal subgenres such as thrash, death metal, grunge and black metal

• Noise gate, TS-style overdrive and preamp boost

• Power supply via mains adapter 9 V DC, centre-negative, 400 mA minimum (not included)

• 2 Inputs: 6.3 mm jack

• 2 Line outputs: 6.3 mm jack (right output for stereo connections and 4-cable method)

• USB Type-C connection for updates via computer

• Dimensions (W x D x H): 9.2 x 14.1 x 6.5 cm

• Weight: 0.567 kg

Effects Pedal

• Stereo Reverb

• With jump, plate and vintage digital effects

• True or buffered bypass

• Preset can be saved

• Additional effects downloadable

• Live/preset mode

• Dual-processor UAFX engine

• 2 Inputs: 6.3 mm jack (input 2 for stereo connection)

• 2 Outputs: 6.3 mm jack (output 2 for stereo connection)

• USB-C connection (for updates via computer)

• Power supply via 9 V DC 400 mA power supply unit (not included in delivery)

Effect Pedal for Electric Guitar

• Compressor

• Authentic emulation of the Teletronix LA-2A optical tube compressor / limiter

• Mix control for simple parallel compression effects

• True / Buffered-Bypass

• Power supply via optional mains adapter 9 V DC, centre negative, min. 250 mA (not included - suitable mains adapter

• Input: 6.3 mm jack

• Output: 6.3 mm jack

• USB Type-C connection for updates via computer

• Dimensions (W x H x D): 6.55 x 5.81 x 12.07 mm

• Weight: 0.299 kg

Stereo Amp and Cabinet Emulation Pedal

• With room modelling, multiple speakers, cabinets and boosts, live and preset modes and customisation possibilities with the UAFX Mobile App

• Classic mic and speaker combinations from the OX Amp Top Box

• 12-Inch combo speaker models: BLU15 (15W Celestion Blue), JP12 (Stock Jensen P12R), GB25 (25W Celestion Greenback)

• Additional free cabinet models via UAFX Control App: Marshall 4x12 with Celestion V30 speaker, Fender 4x10 Bassman Cab with Jensen P10R speaker, Fender 1x12 Cab with vintage JBL D-120F speaker

• Bypass function of the cabinet/microphone emulations

• Power supply via 9 V DC power supply with min. 400 mA, centre-negative (not included)

• 2 Inputs: 6.3 mm jack

• 2 Outputs: 6.3 mm jack

• USB-C connection

• Dimensions: 9.2 x 6.5 x 14.1 cm

• Weight: 567 g

Effect Pedal for Electric Guitar

• With three variations of tube-based tremolo effects, tap tempo, emulated preamp circuit and volume boost

• Three tremolo modes: Dharma (harmonic tremolo), 65 (round, sine wave) and Square (choppy square wave)

• True / buffered bypass

• Input and output: 6.3 mm jack

• USB Type-C connection for updates via computer

• Power supply via 9 V DC mains adapter with min. 250 mA, center-negative (not included)

• Dimensions (W x H x D): 6.55 x 5.81 x 12.07mm

• Weight: 299 g

Stereo Amp and Cabinet Emulation Pedal

• With vibrato, room modelling, multiple speakers, cabs and boosts, live and preset modes, and customisation options with the UAFX mobile app

• Microphone and speaker combinations from the OX Amp Top Box

• 2x12 Speaker models: SILVER (rare 15W Celestion Silver Bulldogs), BLUE (oiriginal Celestion Blue Bulldogs), GREEN (modern Celestion G12Hs)

• Free additional cabinet models via UAFX Control App: 1x12 AC15 Cab with Blue Bulldog, 2x12 Matchless Cab with Celestion G12Hs, 2x12 Two-Rock Cab with Celestion Golds

• Power supply via 9 V DC power supply with min. 400 mA, centre-negative (not included, suitable power supply: art. 543322)

• 2 Inputs: 6.3 mm jack

• 2 Outputs: 6.3 mm jack

• USB-C connection

• Dimensions: 9.2 x 6.5 x 14.1 cm

• Weight: 567 g

Stereo Amp and Cabinet Emulation Pedal

• With spring reverb and vibrato, multiple speakers, cabinets and boosts, live and preset modes, and customisation options with the UAFX mobile app

• Microphone and speaker combinations from the OX Amp Top Box

• 12-Inch combo speaker models: GB25 (vintage Celestion Greenback), Oxford (original Oxford 12K5-6), EV12 (Electro-Voice EVM12L)

• Free additional cabinet models via UAFX Control App: Two-Rock 2x12 Extension Cab with Celestion G12-65s, Vintage 1966 4x10 Fender Super Reverb Cab with original CTS speakers, Vintage 1968 2x12 Fender Twin Reverb Cab with original JBL D-120F speakers

• Power supply via 9 V DC power supply with min. 400 mA, centre-negative (not included)

• 2 Inputs: 6.3 mm jack

• 2 Outputs: 6.3 mm jack

• USB-C connection

• Dimensions: 9.2 x 6.5 x 14.1 cm

• Weight: 567 g

Effect Pedal for Electric Guitar

• With three reverb emulations

• Room, Small Hall and Large Hall "Vintage Digital" programs

• Mod control

• Selectable True / Trails Bypass

• Short / Long Pre-delay: analogue Dry Through

• Input: 6.3 mm jack

• Output: 6.3 mm jack

• USB Type-C connection for updates via computer

• Power supply via 9 V DC power supply unit with negative pole inside and min. 250 mA (not included, suitable power supply unit)

• Dimensions (W x H x D): 6.55 x 5.81 x 12.07 cm

• Weight: 0.295 kg

Effect Pedal for Electric Guitar

• Stereo amplifier and speaker emulation

• High-gain sound of legendary punk, hard rock and metal bands

• Built-in TS-style OD/boost

• Noise gate

• Live and preset modes

• Customisable with the UAFX Mobile App

• 6 Mic/speaker combinations: UK V30 (4x12 Marshall cabinet with V30‘s), CA V30 (4x12 oversized cabinet with V30’s), White 75 (4x12 Marshall cabinet with Celestion 75's), 3 bonus cabs (2x12 EV12, 4x12 Celestion 80, 4x12 Brown via mobile app)

• Power supply via power adapter - 9V DC, centre negative, 400 mA minimum, (e.g. Art. 543322 not included)

• 2 Inputs: 6.3 mm jack (right input for stereo connections and 4-cable method)

• 2 Line outputs: 6.3 mm jack (right output for stereo connections and 4-cable method)

• USB Type-C connection for updates via computer

• Dimensions (W x D x H): 9.2 x 14.1 x 6.5 cm

• Weight: 0.567 kg

Effects Pedal

• Stereo delay

• With tape, analogue, and digital effects

• True or buffered bypass

• Presets can be stored

• Tap tempo mode

• Additional effects can be downloaded

• Dual processor UAFX engine

• Live / preset mode

• 2 Inputs: 6.3 mm jack (input for 2 stereo connections)

• 2 Outputs: 6.3 mm jack (output for 2 stereo connections)

• USB-C connection (for updates via computer)

• Power supply via 9 V DC 400 mA power supply (not included)

Stereo Amp and Cabinet Emulation Pedal

• Three Super Lead tube amp emulations Super Lead, Super Bass and "Brown"

• Emulation of speaker cabinet, mic and room sounds

• Dynamic Speaker Modeling technology from Ox Amp Top Box

• GB25: (Late 60's Marshall with vintage Celestion 25-watts "Greenbacks")

• GB30: (Marshall "100" Birch Cab with Celestion 30-watts "Greenbacks")

• JB|GB: (Two Celestion 25-watts "Greenbacks" / Two JBL D-120 Fs ; 1x12 Electro-Voice EVM12; 2x12 (Two-Rock Extension Cab with Celestion G12M-65 Creambacks)

• 4x12 (Marshall 1960 TV Cab with Celestion Vintage 30s)

• Live and preset modes

• "Hot Rod" amp and speaker mods, plus additional downloadable speaker cabinets and microphones upon registration.

• Bypass function of the cabinet/microphone emulations for use in front of an amp for additional sound character and overdrive sounds

• UAFX Mobile App for foot switch adjustment, noise gate setting, preset recall and archiving, and downloadable Artist presets

• Power supply: optional power supply unit (9V DC, min. 400 mA, centre-negative) Art 543322 (not included)

• 2 Inputs: 6.3 mm jack (right input for stereo connections and 4-cable method)

• 2 Outputs: 6.3 mm jack (right output for stereo connections and 4-cable method)

• USB-C connection

• Dimensions: 9.2 x 6.5 x 14.1 cm

• Weight: 567 g

Guitar Effect Pedal

• With three vintage tape delay emulations

• Emulated analogue preamp circuit and wow/flutter

• Selectable Mint, Worn and Old tape machines

• Wonk control for modulated repeats and vibrating tape splice sounds

• Mono operation

• True / Trails Bypass

• Preamp Off / On

• Analog Dry Through

• Input: 6.3 mm jack

• Output: 6.3 mm jack

• USB Type-C connection for updates via computer

• Power supply via 9 V DC power supply unit with negative pole inside and min. 250 mA (not included in the scope of delivery, suitable power supply unit available under

• Dimensions (W x H x D): 6.55 x 5.81 x 12.07 cm

• Weight: 0.299 kg

Guitar Effect Pedal

• With three Vintage Studio Plate reverb emulations

• Selectable Vintage Bright, Vintage Dark and Modern Full Plate settings

• Controls: Mod, Pre-Delay, EQ and Slow / Fast Rate

• True / Trails Bypass, Pre-Delay, analoger Dry-Through

• Input: 6.3 mm jack

• Output: 6.3 mm jack

• USB Type-C connection for updates via computer

• Power supply via 9 V DC power supply unit with negative pole inside and min. 250 mA (not included in the scope of delivery, suitable power supply)

• Dimensions (W x H x D): 6.55 x 5.81 x 12.07 cm

• Weight: 0.295 kg

Stereo Amplifier and Speaker Emulation

• With 9 famous microphone/speaker pairs, end-to-end amp voicing modifications, live and preset modes, and customisation with the UAFX mobile app

• 3 standard speaker cabinets: 1x12 Black GB25, 2x12 Boutique D65, 2x12 Brute

• 6 bonus speaker cabinets (via UAFX mobile app): 4x12 UK V30, 2x12 JBF120, 1x12 Black EV12, 4x12 Stripped GB, 1x12 JBG125, 2x12 D-EV12

• Jazz and Rock modes

• Power supply via 9V DC power supply unit, centre-negative, 400 mA minimum, not included

• 2 inputs: 6.3 mm jack

• 2 line outputs 6.3 mm jack

• Right output for stereo connections and 4-cable method

• USB Type-C connection for updates via computer

• Dimensions (W x D x H): 9.2 x 14.1 x 6.5 cm

• Weight: 0.567 kg

Effect Pedal for Electric Guitar

• Reverb and delay

• 6 Vintage reverb and delay effects

• "Golden Unit" spring reverb tank (from a classic American guitar amp of the 60s)

• Vintage studio record reverb from The Plant as well as 80s vintage studio digital reverb algorithms

• Tap tempo

• Custom voicings via download

• Separate stereo instances for each reverb and delay

• Buffered bypass

• Analogue dry through

• Optional spillover/trails

• Stereo / dual mono operation

• Controls for delay time, feedback, mix, colour, MOD and reverb

• Inputs: 2x 6.3 mm jack

• Outputs: 2x 6.3 mm jack

• USB Type-C for updates via computer

• Power supply via 9 V DC mains adapter with min. 400 mA, centre-negative (not included)

• Dimensions (W x H x D): 9.2 x 6.5 x 14.1 cm

• Weight: 567 g

Explore the pinnacle of classic chorus, flanging/doubling, and tube tremolo effects.

• Texture your tones with iconic Japanese bucket-brigade chorus/vibrato, circa 1976

• Explore the outer limits with legendary rackmount bucket‑brigade studio flanging/doubling

• Get all the heavenly goodness of 1960's tube-driven tremolo, direct from your favorite American guitar amps

• Get realtime MIDI control of effects parameters*, improved Bluetooth and hardwired connections, and more using updated UAFX Control app

• Quickly access sounds with Live/Preset modes, and play with silent switching, preamp coloration, and true/buffered bypass

• Download additional Phaser X90 and Dharma Trem 61 effects at product registration

• Build your pedalboard around timeless UA design and robust craftsmanship, built to last decades

Details

• Flagship, no-compromise stompbox offering the most authentic bucket-brigade and tube-driven tremolo effects ever captured in an effects pedal

• End-to-end emulation of iconic Japanese chorus/vibrato pedal

• Complete circuit capture of legendary '70s rackmount studio flanger/doubler

• Stem-to-stern model of tube-driven optical tremolo from classic '60s American amps

• Supports MIDI-over-USB*, improved Bluetooth and hardwired connections, and more via the updated UAFX Control app

• Store and recall your favorite preset, silent switching, and true/buffered bypass*

• Free Phaser X90 and Dharma Trem '61 effects, downloadable at registration

Tube Preamp for Electric Bass

• 3 Channels

• Fully analogue preamp & bass amp simulator

• Inspired by the sound of three legendary bass amps - Classic Clean, Vintage Dirt & Modern Drive

• 12AX7 preamp tube in high voltage mode provides warmth and bite

• Integrated dry/wet blend

• Analogue cab sim for live DI & recording

• FX Loop and MIDI In/Out for easy integration into existing setups

• Includes GENOME with 5 DynIR captures, 40 microphones, 12 pedals, 12 TSM amps, 17 STUDIO FX, 40 AI amp captures and an expert-selected RIG library

• Controls: DI Out volume - Classic Clean: Gain, Volume, Bass, Treble - Vintage Dirt: Gain, Volume - Modern Drive: Gain, Volume - Crunch & Lead: Boost, Bass, Middle, Treble

• Effect loop-in: Serial

• Input: 6.3 mm jack

• Output: 6.3 mm jack

• FX Send and return: 2x 6.3 mm jack

• DI Out: XLR

• Aux In: 3.5 mm stereo jack

• MIDI In & Out

• Power supply connection: Barrel connector 5.5 x 2.1 mm, centre negative

• Power consumption: 600 mA

• Power supply with 12 V DC mains adapter (included)

• Dimensions (W x D x H): 192 x 117 x 72 mm

• Weight: 0.75 kg

DESCRIPTION

Michelangelo combines the Dynamism of valve sound with the definition of a pedal effect.

The heart of Michelangelo is made entirely of JFET transistors, which characterize a dynamic and warm sound recreating the effect produced by a Tube (Valve) head.

Thanks to the three position switch it is possible to select three distortion modes with silicon, germanium and JFET semiconductors.

The possibility to choose the type of distortion makes Michelangelo extremely flexible, with distortions that offer the whole range from a boost, to light crunch, to overdrive up to a very defined distortion typical of the one produced by a valve head.

Another great feature of Michelangelo is the presence of a preamplifier and an output boost, both separately controllable and activated through a dedicated “BOOST” footswitch.

In fact, there are two independent true bypass footswitches: DRIVE activate/deactivate the drive effect and BOOST activate/deactivate the preamp, the output boost or both. A second toggle switch allows you to keep the preamp always active or only in correspondence of the BOOST footswitch on.

The preamplifier acts on the amplitude of the input signal to the amplification and distortion section of Michelangelo. The control is made available through the dedicated PRE knob: in this way a further management of the desired sound is obtained by acting exclusively on the preamplifier.

The PRE level control has an excursion from 0 to 15 dB: PRE at minimum therefore has no effect on the input signal, leaving it unaltered, while PRE at maximum brings the input signal to be amplified by 15 dB before being put into entry to the DRIVE section of Michelangelo.

With the PRE switch set to the OFF position, the preamplifier will only be activated when the BOOST foot switch is activated. If the PRE switch is in the ON position, the preamplifier will be active regardless of the on / off status of the BOOST footswitch. The preamplifier left on the ON position allows a very precise control of the saturation and attack level of the DRIVE sound, while the OFF position of the PRE selector allows a “more gain” effect hooked up to the activation of the BOOST footswitch.
The DRIVE section of Michelangelo has four controls available: GAIN2, LEVEL, B and M.

GAIN2 defines the amount of distortion.

LEVEL the output volume of the DRIVE section.

B and M define the equalization of the distortion with the regulation of the band of low frequencies B and high frequencies M.

The SIL / GER / FET selector acts on the DRIVE section of Michelangelo, modifying its distortion mode.

The BOOST knob adjusts the output boost activated after the BOOST foot switch is activated. The BOOST level control has an excursion from 0 to 15 dB: BOOST at minimum has no effect on the output signal leaving it unchanged with respect to the output level produced by the DRIVE, while BOOST at maximum amplified in a linear way of 15 dB the signal of exit.

Finally, the other great feature made available by Michelangelo is the BLEND control, that lets the output signal be a mix of the amount of distorted and clean sound with a complete excursion from completely distorted sound to completely clean sound to a desired mix of two.

The selected components are high quality with integrated circuits and JFET transistors belonging to 70s vintage series.

The compact box allows easy positioning in the pedal board.

External or battery-powered 9V power supply.

LED light on / off status indicator of the DRIVE and BOOST effect in addition to the LED at the base always active.

DESCRIPTION

Chorus with 2 Controls: Right “Speed”; Left “Depth”.

Chorus with a typical ambient modulation defined by an original analog modulation.

Through the use of a delay chain adds a phase shift to the signal without loosing the input harmonics related to the signal.

The two “Speed” and “Depth” controls let you select the modulation speed and the amount of modulation added to the input signal.

Vintage component research with :integreted circuit and transistors of the series belonging to the production of the ‘70s stock.

Manual circuit design made with attention on the treatment of the signal audio paths. Mechanical robustness, guaranteed by board-mounted components.

TRUE BYPASS switch and high quality components is one of the specific choices made for the standard of our pedals.

The high-brightness LEDs ensure the visibility of the ignition status even under conditions of direct reflection on the pedal.

Input/output Jack from 6.3 mm 1/4 “placed sideways to the pedal.

Input impedance 1 Mohm, output 300 ohm.

Current with LED on 19ma, standby 500 UA.

DESCRIPTION

Analog pedal with one Volume control.

Input/output Jack from 6.3 mm 1/4 “placed sideways to the pedal.

The product is one of the most demanded effects, thanks to its constructive characteristics that make it an extraordinary pedal.

Clear boost until 3/4 of the level regulation. Adding more level the pedal adds a slight crunch to the sound.

The pedal is ideal for adding dynamics to the sound, exalting every harmonica coming from the guitar.

TRUE BYPASS switch, carbon resistors and high quality components are one of the specific choices made standard of our pedals. These components are wanted in a product with electronic devices belonging to a vintage series, elements that distinguish a character and a warm and defined sound.

9 volts power supply DC through internal battery or external stabilized power supply.

Battery replacement is possible by removing the four screws on the bottom cover.

Input impedance 1 Mohm, output 300 ohm.

Current with LED on 19ma, standby 500 UA.

DESCRIPTION

Analog effect.

Input/output Jack from 6.3 mm 1/4 “placed sideways to the pedal.

Pedal with three Volume, Gain and Tone controls

Fuzz (silicon) equipped with wide gain range ideal in loudness with large and defined distortions, up to use in solos with dynamic sustain. With the combined adjustment of GAIN and LEVEL it provides a mix of unique saturation and definition.

Powerful and incisive.

TRUE BYPASS switch, carbon resistors and high quality components are one of the specific choices made standard of our pedals. The components are wanted in a project with electronic devices belonging to vintage series, elements that distinguish a character and a warm and defined sound.

9 volts power supply DC through internal battery or external stabilized power supply.

Battery replacement is possible by removing the four screws on the bottom cover.

Input impedance 1 Mohm, output 300 ohm.

Current with LED on 19ma, standby 500 UA.